7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Standard Ceiling Mount
Routing the wires
Assembling the fan
Preparing for mounting
□ Remove the canopy ring (D) from the canopy (C) by turning
the ring to the right until it unlocks.
□ Remove the mounting bracket (A) from the canopy by loos-
ening four canopy screws (HH) on the top of the canopy (C).
□ Remove the two non-slotted canopy screws (HH) with
washers (WW). This will enable you to remove the mounting
bracket (A).
□ Route the wires exiting the top of the fan motor (F),
through the coupler cover (E), and canopy ring (D).
□ Make sure the slot openings are on top and route the
wires through the canopy (C) and then through the
ball/downrod assembly (B).
2
3
1
A
WW
HH
C
D
C
D
E
B
F
B
SS
RR
TT
□ Remove the setscrew (RR) by turning it counterclockwise.
□ Install the downrod (B) by inserting it into the motor collar (TT),
and turning it clockwise until it is tight.
□ Reinstall the setscrew (RR) turning clockwise until tight.
NOTE: This fan is equipped with a safety tab (SS). Should
the setscrew (RR) ever become loose while the fan is
running in reverse, the safety tab (SS) will engage and
stop the fan from falling.
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(RR) must be completely tightened
Comments to this Manuals