Home Decorators Collection 51422 Installation Guide download pdf (Page 2)

Table of Contents ................................................................ 2

Safety Information ...............................................................2

Warranty ............................................................................... 3

Pre-Installation ....................................................................3

Installation ............................................................................6

Assembly ..............................................................................7

Operation ...........................................................................13

Care and Cleaning ............................................................. 14

Troubleshooting .................................................................14

1. All wiring must be in accordance with the National Electrical

Code ANSI/NFPA 70 and local electrical codes. Electrical

installation should be performed by a qualied licensed

electrician.

2. The outlet box and support structure must be securely mounted

and capable of reliably supporting 35 pounds (15.9 kg). Use

only UL Listed outlet boxes marked “Acceptable for Fan

Support of 35 pounds (15.9 kg) or less.”

3. The fan must be mounted with a minimum of 7 ft (2.1 m)

clearance from the trailing edge of the blades to the oor.

4. Do not operate the reversing switch while the fan blades are

in motion. You must turn the fan off and stop the blades before

you reverse the blade direction.

5. Do not place objects in the path of the blades.

6. Electrical diagrams are for reference only. Light kits that are

not packed with the fan must be UL listed and marked suitable

for use with the model fan you are installing. Switches must be

UL General Use Switches. Refer to the instructions packaged

with the light kits and switches for proper assembly. Use 14W

CFL bulbs max (included).

7. After making electrical connections, spliced conductors should

be turned upward and pushed carefully up into the outlet box.

The wires should be spread apart with the grounded conductor

and the equipment-grounding conductor on one side of the

outlet box.

8. All setscrews must be checked and retightened where

necessary before installation.

9. Suitable for use in wet locations when installed in a GFCI

protected branch circuit. Use only with light kits marked

“Suitable for use in wet locations”

WARNING: To reduce the risk of personal injury,

do not bend the blade brackets (also referred to as

anges) during assembly or after installation. Do not

insert objects in the path of the blades.

WARNING: To reduce the risk of re or electric

shock, do not use this fan with any solid-state speed

control device.

WARNING: Remove the rubber motor stops on

the bottom of the fan before installing the blades or

testing the motor.

WARNING: To avoid possible electrical shock,

turn the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

Safety Information

Table of Contents

CAUTION: To reduce the risk of personal injury,

use only the screws provided with the outlet box.

CAUTION: To avoid personal injury or damage to the fan

and other items, use caution when working around or

cleaning the fan.

WARNING: To reduce the risk of re, electric shock

or personal injury, mount to outlet box marked

“acceptable for fan support of 35 lbs. (15.9 kg) or

less” and use screws provided with the outlet box.

READ AND SAVE THESE INSTRUCTIONS.

1 2 3 4 5 6 7 ... 29 30

Comments to this Manuals

No comments

Home Decorators Collection 51422 Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Household fans Home Decorators Collection 51422