Home Decorators Collection HB7051PA-246 Instruction Manual download pdf (Page 7)

INSTALLATION & ASSEMBLY (cont.):

9. Slide the Glass Shade into the Cage (Fig. 3).

10. Place the Hood onto the Cage. Simultaneously pull the wires

from the back of the Wall Plate. Align the holes of the Hood

with the holes of the Cage. First, screw a Hood Screw into

the threaded hole of the Hood, then into the threaded hole of

the Cage. Finally, slide the remaining Hood Screw into the

non-threaded hole of the Hood, then screw it into the

threaded hole of the Cage (Fig. 3).

11. Using an exterior rubber sealant, caulk around the edge of

the upper 2/3s of the wall plate. Leave the bottom 1/3

unsealed to allow drainage of any water that might leak into

the enclosure.

Page 7

Fig. 3

Wall Plate

Cage

Glass Shade

Hood

Hood Screw

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Home Decorators Collection HB7051PA-246 Instruction Manual Page 7