Home Decorators Collection AM175-ORB Instruction Manual download pdf (Page 10)

Assembly — Close-to-Ceiling Mounting

Assembling the fan

Preparing the motorPreparing the canopy

□ Remove three of the six collar mounting screws with

lock washers (DD) (every other one) from the collar

on top of the fan motor assembly (G).

WARNING: Failure to completely tighten the three collar

mounting screws (DD) could result in the fan becoming loose

and possibly falling.

□ Remove the canopy ring (B) from the canopy (C).

□ Remove the mounting bracket (A) from the canopy (C)

by loosening the four canopy mounting bracket

screws (BB) on the top of the canopy (C). Remove the

two non-slotted canopy mounting bracket screws

(BB) and loosen the slotted canopy mounting bracket

screws (BB).

□ Remove the canopy bottom cover (D) from the

canopy (C).

□ Make sure the slot openings of the canopy ring (B)

are on top, and then proceed to place the canopy ring

(B) and canopy (C) over the collar at the top of the fan

motor assembly (G).

□ Align the mounting holes in the bottom of the canopy

bly (G). Fasten using the three collar mounting screws

with lock washers (DD) previously removed.

□ Tighten the collar mounting screws (DD) securely.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

No comments

Home Decorators Collection AM175-ORB Instruction Manual Page 10