Home Decorators Collection 51591 Installation Guide download pdf (Page 9)

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan (continued)

Outlet box

in the ceiling (KK)

Green or bare wireBlack White

Black White Green

BB (x3)

Making the electrical connection

IMPORTANT: Use the plastic wire connectors (BB) supplied with

your fan. Secure the connectors with electrical tape and ensure

there are no loose strands or connections.

WARNING: Each wire not supplied with this fan is designed to

accept up to one 12-gauge house wire and two wires from the

fan. If you have larger than 12-gauge house wiring or more

than one house wire to connect to the fan wiring, consult an

electrician for the proper size wire nuts to use.

□ The fan comes with 78 in. lead wires for use with an extended

ball/ downrod assembly. If using the 6 in. ball/downrod

assembly (B) provided, you can cut the lead wires to your

desired length (no shorter than 12 in.). This will make extra

room in the canopy (C), if you do not wish to cut the wires,

you will need to neatly wrap them.

□ Connect the fan motor green wires to the household green or

bare wire using a wire connecting nut (BB).

□ Connect the fan motor white wires to the household white

wire using a wire connecting nut (BB).

□ Connect the fan motor black wires to the household black

wire using a wire connecting nut (BB).

□ Secure each wire connecting nut using electrical tape.

□ Turn the wire connecting nut (BB) upward and push the wiring

into the outlet box (KK).

NOTE: The fan comes with 78 in. lead wires for use with an

extended ball/ downrod assembly. If using the 6 in. ball/downrod

assembly (B) provided, you can cut the lead wires to your desired

length (no shorter than 12 in.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

Home Decorators Collection 51591 Installation Guide Page 9