Home Decorators Collection 14430 Instruction Manual download pdf (Page 14)

Assembly — Installing the Light Kit

□ Remove one of three screws (MM) from the fan motor

assembly (H) mounting ring, and loosen the other two

screws (MM), but do not remove.

□ Place the key holes from the light kit plate (J) over the

two screws (MM) previously loosened from the fan

motor assembly (H) mounting ring. Turn the light kit

plate (J) until it locks in place at the narrow section of

the key holes. Secure by tightening the two screws

(MM) previously loosened and the one screw (MM)

previously removed.

□ Remove one of three screws (NN) from the light kit

plate (J), and loosen the other two screws (NN), but do

not remove.

□ While holding the 17W LED assembly (K) under your fan,

rmly snap the wire connection plugs (PP) together.

□ Place the key holes from the 17W LED assembly (K)

over the two screws (NN) previously loosened from the

light kit plate (J). Turn the17W LED assembly (K) until it

locks in place at the narrow section of the key holes.

Secure by tightening the two screws (NN) previously

loosened and the one screw (NN) previously removed.

Attaching the light kit plate

to the mounting ring

Attaching the 17W LED Assembly

to the light kit plate

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

Home Decorators Collection 14430 Instruction Manual Page 14